dr. saša novak  
                     
 
 
home
 
biography
 
research
 
projects
 
bibliography
 
patents & innovations
 
students
 
 
 
 
 
 
 
 
 
 

Selected Papers:

NOVAK, Saša, IVEKOVIĆ, Aljaž, HATTORI, Y. Production of bulk SiC parts by electrophoretic deposition from concentrated aqueous suspension. Advances in applied ceramics, ISSN 1743-6753, 2014, 113, 14-21

IVEKOVIĆ, Aljaž, NOVAK, Saša, DRAŽIĆ, Goran, BLAGOEVA, Darina, GONZALEZ DE VICENTE, Sehila. Current status and prospects of SiCf/SiC for fusion structural applications. Journal of the European Ceramic Society, ISSN 0955-2219., 2013, 33, 10, 1577-1589

NOVAK, Saša, IVEKOVIĆ, Aljaž. Fabrication of SiCf/SiC composites by SITE-P process. Journal of nuclear materials, 2012,  427, 110-115

DRNOVŠEK, Nataša, NOVAK, Saša, DRAGIN, Urška, ČEH, Miran, GORENŠEK, Matevž, GRADIŠAR, Marko. Bioactive glass enhances bone ingrowth into the porous titanium coating on orthopaedic implants.International Orthopaedics (SICOT), 2012, 36:1739–1745

DRNOVŠEK, Nataša, RADE, Katja, MILAČIČ, Radmila, ŠTRANCAR, Janez, NOVAK, Saša. The properties of bioactive TiO2 coatings on Ti-based implants. Surf. coat. technol.., 2012, vol. 209, 177-183,

BRAEM, Annabel, MATTHEYS, Tina, NEIRINCK, Bram, ČEH, Miran, NOVAK, Saša, SCHROOTEN, Jan, VAN DER BIEST, Omer, VLEUGELS, Jef. Bioactive glass-ceramic coated titanium implants prepared by electrophoretic deposition. Mater. sci. eng., C, Biomim. mater., sens. syst.., 2012, vol. 32, no. 8, 2267-2273

RADE, Katja, NOVAK, Saša, DRAŽIĆ, Goran, KOBE, Spomenka. Co-deposition and densification of SiC with MgO for biomedical applications. J. Mater. Sci., 2012, vol. 47, no. 7, 3400-3406

NOVAK, Saša, IVEKOVIĆ, Aljaž. Fabrication of SiC/SiC composites by SITE-P process. J. nucl. mater., 2012, vol. 427, no. 1/3, 110-115

NOVAK, Saša, KOENIG, Katja, IVEKOVIĆ, Aljaž. Electrophoretic deposition in production of ceramic matrix composites. V: DICKERSON, James H., BOCCACCINI, Aldo R. Electrophoretic deposition of nanomaterials, (Nanostructure science and technology). New York [etc.]: Springer, cop. 2011, 295-348

CANNIO, M., NOVAK, Saša, BESRA, L., BOCCACCINI, Aldo R. Electrophoretic deposition. V: BANSAL, Narottam P., BOCCACCINI, Aldo R. Ceramics and composites processing methods. Hoboken: Wiley, cop. 2012, 515-547.

ZORKO, Milena, NOVAK, Saša, GABERŠČEK, Miran. Fast fabrication of mesoporous SiC with high and highly ordered porosity from ordered silica templates. J. Ceram Process. Res., 2011, vol. 12, no. 6, str. 654-659

PETKOVIĆ, Jana, KÜZMA, Tadeja, RADE, Katja, NOVAK, Saša, FILIPIČ, Metka. Pre-irradiation of anatase TiO2 particles with UV enhances their cytotoxic and genotoxic potential in human hepatoma HepG2 cells. J. hazard. mater.., 2011, vol. 196, str. 145-152

SKOČAJ, Matej, FILIPIČ, Metka, PETKOVIĆ, Jana, NOVAK, Saša. Titanium dioxide in our everyday life: is it safe? Radiol. oncol., 2011, vol. 45, no. 4, 227-247

IVEKOVIĆ, Aljaž, DRAŽIĆ, Goran, NOVAK, Saša. Densification of a SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process. J. Eur. Ceram. Soc.., 2011, vol. 31, no. 5, 833-840

KOENIG, Katja, NOVAK, Saša, IVEKOVIĆ, Aljaž, RADE, Katja, MENG, Decheng, BOCCACCINI, Aldo R., KOBE, Spomenka. Fabrication of CNT-SiC/SiC composites by electrophoretic deposition. J. Eur. Ceram. Soc., 2010, vol. 30, no. 5, 1131-1137

DRNOVŠEK, Nataša, DANEU, Nina, REČNIK, Aleksander, MAZAJ, Matjaž, KOVAČ, Janez, NOVAK, Saša. Hydrothermal synthesis of a nanocrystalline anatase layer on Ti[sub]6Al[sub]4V implants. Surf. coat. technol.., 2009, vol. 203, no. 10/11, 1462-1468

NOVAK, Saša, KOVAČ, Janez, DRAŽIĆ, Goran, FONTE FERREIRA, José Marija, QUARESMA, S. Surface characterisation and modification of submicron and nanosized silicon carbide powders. J. Eur. Ceram. Soc.., 2007, vol. 27, p. 3545-3550

NOVAK, Saša, KALIN, Mitjan, LUKAS, P., ANNE, G., VLEUGELS, Jozef, VAN DER BIEST, Omer. The effect of residual stresses in functionally graded alumina-ZTA composites on their wear and friction behaviour. J. Eur. Ceram. Soc., 2007, vol. 27, pp. 151-156. 

KALIN, Mitjan, NOVAK, Saša, VIŽINTIN, Jože. Surface charge as a new concept for boundary lubrication of ceramics with water. J. phys., D, Appl. phys., 2006, vol. 39, sp. 3138-3149.

KALIN, Mitjan, DRAŽIĆ, Goran, NOVAK, Saša, VIŽINTIN, Jože. Wear mechanisms associated with the lubrication of zirconia ceramics in various aqueous solutions. J. Eur. Ceram. Soc.., 2006, vol. 26, pp. 223-232

NOVAK, Sasa, DRAŽIĆ, Goran, MEJAK, Katja. Electrophoretic deposition of green parts for LPS SiC-based ceramics. Key eng. mater., 2006, vol. 314, pp. 45-50.

DRAŽIĆ, Goran, NOVAK, Saša, DANEU, Nina, MEJAK, Katja. Preparation and analytical electron microscopy of SiC continuous fiber ceramic composite. J. mater. eng. perform., 2005, vol. 14, pp. 424-429.

NOVAK, Sasa, DRAŽIĆ, Goran, KALIN, Mitjan. Structural changes in ZrO2 ceramics during sliding under various environments. Wear, 2005, vol. 259, str. 562-568.

NOVAK, Sasa, HENRIQUES OLHERO, Susana Maria, FONTE FERREIRA, José Marija, ZUPANČIČ-VALANT, Andreja: Rheological properties of paraffin suspensions of surface modified alumina powder for low-pressure injection moulding. Rheol. Acta, 2004, vol. 43, no. 5, pp. 559-566.

NOVAK, Saša, KALIN, Mitjan: The effect of pH on the wear of water-lubricated alumina and zirconia ceramics. Tribol. lett., 2004, vol.17, pp. 727-732.

NOVAK, Sasa, KOBE Spomenka, McGuiness Paul, The effect of chemically bonded organic surface layers on the behaviour of fine powders: Powder Technology, 2004, vol. 139, pp. 140-147

OLHERO, S.M, NOVAK, Sasa, OLIVIERA, Marta, KRNEL, Kristoffer, KOSMAČ, Tomaz, FERREIRA, J.M.F.: A thermo-chemical surface treatment of AlN powder for the aqueous processing of AlN ceramics. J. mater. res., 2004, vol. 19, pp. 746-751.

NOVAK, Sasa, LAHAJNAR, Gojmir, SEPE, Ana, KOSMAČ, Tomaž: Role of water during AlN-hydrolysis-assisted solidification in ceramic suspensions studied by proton nuclear magnetic resonance T2 relaxation. J. mater. res., 2003, vol. 18, pp. 1968-1974.

KALIN, Mitjan, NOVAK, Sasa, VIŽINTIN, Jože: Wear and friction behavior of alumina ceramics in aqueous solutions with different pH. Wear, 2003, vol. 254, pp. 1141-1146.

NOVAK, Sasa, KOSMAČ, Tomaž, KRNEL, Kristoffer, DRAŽIĆ, Goran. Principles of the hydrolysis assisted solidification (HAS) process for forming ceramic bodies from aqueous suspension. J. Eur. Ceram. Soc.. 2002, vol 22, pp. 289-295

NOVAK, Sasa, KOSMAČ, Tomaž: Preparation of alumina ceramics from aqueous suspensions employing the hydrolysis of aluminum nitride. J. mater. res., 2002, vol. 17, pp. 445-450.

NOVAK, Sasa, DRAŽIĆ, Goran: Analytical electron microscopy study of green ceramic formed from aqueous suspensions using the hydrolysis-assisted solidification process. J. Am. Ceram. Soc., 2002, vol. 85, pp. 264-266.

NOVAK, Sasa, DRAŽIĆ, Goran, MAČEK, Srečo: A study of ceramic-suspension solidification using complex-impedance spectroscopy. J. Eur. Ceram. Soc., 2001, vol. 21, pp. 2081-2084.

NOVAK, Sasa, DAKSKOBLER, Ales, RIBITSCH, V.: The effect of water on the behaviour of alumina-paraffin suspensions for low-pressure injection moulding (LPIM). J. Eur. Ceram. Soc.. 2000, vol. 20, pp. 2175-2181.